Carrier phase prediction method for GNSS precise positioning in challenging environment

Since the signals of global navigation satellite system (GNSS) are blocked frequently in challenging environments, the discontinuous carrier phases seriously affect the application of GNSS precise positioning. To improve the carrier phase continuity, this paper proposes a carrier phase prediction method based on carrier open-loop tracking. In the open-loop tracking mode, the carrier numerically controlled oscillator (NCO) is controlled by the predicted Doppler, but not by the loop filter output. To improve the phase prediction effective time, accurate receiver clock drift estimation is studied in the prediction method. The phase prediction performance is tested on GNSS software receiver. In the phase prediction effective time tests, open-loop processes were set for the tested channel. The test results show that, when some satellite signals are blocked in 15?s, the probability of carrier phase error less than quarter cycles is more than 94%. In the real time kinematic (RTK) positioning tests, some satellite signals are blocked in 10–15?s repeatedly. The test results show that, the carrier phase continuity is basically not affected by the signal interruption, and the RTK can almost keep continuous centimeter-level positioning accuracy without re-fixing the integer ambiguity.     

A drilling tool design and in situ identification of planetary regolith mechanical parameters

The physical and mechanical properties as well as the heat flux of regolith are critical evidence in the study of planetary origin and evolution. Moreover, the mechanical properties of planetary regolith have great value for guiding future human planetary activities. For planetary subsurface exploration, an inchworm boring robot (IBR) has been proposed to penetrate the regolith, and the mechanical properties of the regolith are expected to be simultaneously investigated during the penetration process using the drilling tool on the IBR. This paper provides a preliminary study of an in situ method for measuring planetary regolith mechanical parameters using a drilling tool on a test bed. A conical-screw drilling tool was designed, and its drilling load characteristics were experimentally analyzed. Based on the drilling tool-regolith interaction model, two identification methods for determining the planetary regolith bearing and shearing parameters are proposed. The bearing and shearing parameters of lunar regolith simulant were successfully determined according to the pressure-sinkage tests and shear tests conducted on the test bed. The effects of the operating parameters on the identification results were also analyzed. The results indicate a feasible scheme for future planetary subsurface exploration.     

基于产品结构的航天器AIT过程多维数据管理系统

文章为解决航天器AIT过程中数据集成度低、数据应用不佳等问题,从数据模型构建、数据集成等方向出发,分析了AIT过程数据在产品结构、时间周期、阶段型号3个维度的演变过程,构建了多维数据模型,并开发基于产品结构的多维数据管理系统。该系统以产品结构为核心,对AIT过程数据进行重新组织,定义不同系统间、不同维度数据之间的关联关系,实现了AIT过程全数据的结构化整合,在此基础上生成了AIT过程数据包。     

高校新媒体环境下大学生意识形态教育新路径

意识形态关乎社会稳定和国家前途,必须得到足够的重视。而意识形态教育中青年学生的问题又尤为突出,当代大学生思想活跃,自我意识强烈,对意识形态领域的教育较为反感,因此意识形态教育工作必须创新其内容和形式。高校新媒体平台因为其新颖性和碎片化的特点,可以很好的作为意识形态教育工作的载体,承担意识形态教育工作的重任。     

机场终端区域电磁环境分析

主要分析了机场终端区域主要使用的无线电设备及位置分布,各种无线电设备对电磁环境的要求以及信号覆盖、信号强度,对可能存在的干扰进行简单的分析,为进一步对机场终端区电磁环境仿真奠定理论基础。最后,本文对广汉机场的电磁环境进行了具体分析。     

考虑两种失效竞争的多状态冷贮备系统可靠性模型

针对装备系统中多状态工作部件存在退化失效与突发失效竞争的情况，以冷贮备系统为研究对象，假设系统内3个维修台可分别提供预防性维修与两种不同类型的修复性维修，采用随机检测策略，系统性能水平在一定范围内退化时进行预防性维修，部件完全退化失效时进行退化失效修复性维修，而突发失效时进行突发失效修复性维修；利用PH （Phase-type）分布描述模型中各类随机时间变量，外部冲击的到达则采用PH更新过程描述，建立了考虑退化失效与突发失效的多状态冷贮备系统可靠性模型。最后通过算例验证了模型的适用性，演示了预防性维修阈值以及三类维修速率对系统可靠性的影响。     

基于位移和力值组合的静重式力标准机砝码加卸载控制方法研究

介绍了一种基于位移和力值组合的静重式力标准机砝码加卸载的控制方法，通过监测砝码的移动量和参考力传感器叠加系统的力值量，实时调整加卸载机构的加卸载速度，以实现对被检力传感器的平滑加卸载的目的。该方法有效解决了吊挂在加载过程中产生较大摆动，影响力标准机复现力值准确度的问题，同时也消除了力值过冲现象，避免了因逆程效应而导致的力传感器输出偏差。     

通用的航电系统总线接口仿真平台的设计和应用

针对当前航电系统仿真器的缺点,提出了一种通用的航电系统总线接口仿真平台的设计思想,通过建立仿真数据库,从待仿真的航电系统设备中的接口信息抽象出属性和行为,然后用数据库的方式来描述,实现了仿真软件和仿真对象的分离,从而使该仿真平台具备了通用性和灵活性。该仿真平台已经在某型机航电系统地面联试中得到了应用。     

Effects of in-track maneuver on Sun illumination conditions of near-circular low Earth orbits

By developing approximate analytical models considering the J₂ perturbation, the effects of an in-track maneuver on the orbital Sun illumination conditions of near-circular low Earth orbits are analyzed. First, two approximate models for the variations in orbital sunshine angles are developed, one for variations at a given time and the other for variations at a given argument of latitude. Next, two approximate models for variations in orbital arc in Earth shadow are developed, one considers the small eccentricity and the other uses the zero eccentricity. Finally, the developed approximate models are applied to analyzing the Sun illumination conditions of a typical in-track maneuver mission on a near-circular low Earth orbit. From the results obtained, three major conclusions can be drawn. First, the variations in orbital sunshine angles at a given time may reach tens of degrees when the drifting time reaches hundreds of orbital periods, and the approximate model for that situation cannot effectively approach the numerical results. Second, the variations in orbital sunshine angles for any given argument of latitude are only a couple of degrees even when the drifting time reaches 500 orbital periods, and the approximation model developed can effectively approach the numerical results. Third, for variations in orbital arc in Earth shadow, the approximate model considering the small eccentricity has simple expressions and can effectively approach the numerical results; in contrast, the approximate model using the zero eccentricity has relatively worse precision.     

基于EKF的主动雷达寻的制导状态估计与最优控制研究

针对主动雷达寻的制导问题,进行了非线性系统状态估计和最优制导律的研究,并进行了目标机动情况下的仿真验证。利用主动雷达给出的带有噪声的观测信息,设计了寻的制导系统扩展卡尔曼滤波器,估计弹目相对运动状态信息。基于最优控制理论,按照需用过载和脱靶量最小设计了线性二次型最优制导律。仿真结果表明,所设计的主动雷达寻的制导系统滤波器和最优制导律能有效对付机动目标,满足飞行器控制要求。